The Dhaka Times
With the commitment to keep the young generation ahead, Bangladesh's largest social magazine.

redporn sex videos porn movies black cock girl in blue bikini blowjobs in pov and wanks off.

Make UPS Easy to IPS [Tutorial]

The Dhaka Times Desk Today we will know how to easily use a computer UPS as an IPS to light the house!


UPs41

Hot days are coming, hot days mean load shedding. As a result, light is needed to study or light the house. Many cannot afford to buy IPS or there are bachelors living in private rooms. For those who are bachelors and have a computer at home with a UPS, then today's tutorial is for you to save a little from load shedding on hot days.

If you look at the UPS of your home computer, you will see that it has three sockets on the back. One input is the other two outputs. A Cono UPS may have only two sockets, input and output. If you want single use i.e. enough light for yourself or a room then UPSE is enough for you.

Whatever you need:

1) A UPS
2) 7w/9w/11w energy saving light.
3) 12 Volt, 15W, DC to AC converter or 12 Volt Solar circuit for special safety.
4) Bulb holder and two pins.
5) Connection wire, and costep.

You can connect a 7w/9w/11w energy saving light to the output on the back of the UPS by connecting the bulb holder with the two-pin socket. Your bulbs will continue to light directly from the UPS. Usually the voltage we get from UPS is AC and in this AC we directly connect the energy light between 7-24 W only it will light. But you can connect 12 Volt, 15W, DC to AC converter or 12 Volt Solar circuit for added security. Also if the lamp is connected directly to the UPS you will hear the annoying tone. There are two ways in this case, firstly you can remove the toner from the UPS or directly from the battery by connecting a 12 Volt, 15W, DC to AC converter or 12 Volt Solar circuit and take a separate line. Taking a separate line is very good for you. Because in this case, the UPS circuit will not be active while lighting the lamp, so no extra charge will be consumed. You can run a lamp for 2 hours from a 5 minute UPS if you take the line directly from the battery with a Volt Solar circuit.

In this way you can light a light bulb from a UPS, you can get light for 4 to 5 hours continuously from a good quality UPS. This will not adversely affect your UPS. But you have to turn off the computer during this time.

You may also like this
Loading...
sex không che
mms desi
wwwxxx
en_USEnglish